PocketWizard | Flash and Camera Triggers

The dedicated FlexTT5® Transceiver for Nikon is part of a new generation of PocketWizard ControlTL radios with i-TTL and remote power control for Nikon Speedlights, and select studio lights. Your creativity also now extends far beyond X-Sync speeds with HyperSync and FP Sync capabilities.
 
With its built in hot-shoe, ControlTL™ firmware and transceiver function, the FlexTT5 is the perfect addition to Nikon CLS / i-TTL flash system and takes the Nikon CLS system beyond the boundaries of infrared technology.  When paired with the MiniTT1® Transmitter or another FlexTT5 Transceiver, a whole new world of wireless flash freedom opens up. The FlexTT5 is also the perfect Transceiver for your manual triggering needs and works with all MultiMAX channels and many of the MultiMAX advanced functions.

On camera, the FlexTT5 works identically to the MiniTT1 with the convenience of AA batteries. The system tracks your changes in ISO and aperture and reacts accordingly to make sure exposures stay right on target. Use the exposure compensation dial on your camera to remotely adjust your flash output. Mount a flash or command unit on the FlexTT5 to use the same zone controls as you would normally. Slip in the AC3 ZoneController for Nikon and use its simple interface to control three zones of lights.

With PocketWizard's patent pending HyperSync™ Technology, the FlexTT5 allows you to use sync speeds beyond your camera's x-sync, up to 1/8000th of a second with some camera/strobe combinations, giving you the control you've always been looking for.  With ControlTL Firmware Upgrade 6.0, HyperSync is automated and HyperSync timing is now adjusted in two seperate places - on the transmitter and on the receiving ControlTL radio. The transmitting or on-camera MiniTT1 or FlexTT5 automatically adjusts HyperSync to compensate for changes made to shutter speed. Photographers can further refine HyperSync via the PocketWizard Utility.  Learn more HyperSync Automation at wiki.pocketwizard.com/hypersync.  

You can also use your camera's High Speed Sync /FP mode with Nikon speedligths with the convenience and freedom of radio reliability.  Use any shutter speed or f-stop you want no matter where you place your flash.
 
Under a remote flash, the FlexTT5 is your seamless connection to remote power control. Select one of three zones, and add as many lights to each zone as you like. Run one zone in manual and another in i-TTL and control it all from your camera. Place your flashes where you want to; hide them or use them in bright daylight.
 
More Flexibility.  Use the FlexTT5's camera sync port to trigger a remote camera.  Use the flash port to trigger any manual flash. The FlexTT5 also has our Auto-Sensing Transceiver Technology that enables it to switch back and forth between Transmitter and Receiver modes as needed for greater flexibility on the job. When a hot-shoe or other trigger is detected, it automatically switches to Transmitter mode. 
 
With Auto Relay Mode you can easily trigger a remote camera in sync with remote flash.  Put a camera where you can’t be and use remote TTL or manual lighting at the same time.  Expand your coverage and increase your creativity.
 
The FlexTT5 has two channel configuration settings; C1 and C2.  Each can be programmed as needed with up to 20 ControlTL channels* for TTL photography, or 32 standard channels** for manual flash photography.  The FlexTT5 Transceiver also has a three-zone selector switch for ease of use with Nikon zones and ratios.
 * - 20 ControlTL channels for FCC/IC 344 MHz radios and three ControlTL channels for CE 433 MHz radios.
 ** - 32 Standard channels for FCC/IC 344 MHz radios and 35 Standard channels for CE 433 MHz radios.

A PocketWizard Utility download is provided to support the FlexTT5 Transceiver via a USB port.  The Utility allows you to configure your channel settings, dial in your HyperSync timing, adjust your sleep-mode timers as well as update your product to the latest firmware.

340.00 - 354.00 MHz, US FCC / IC Frequency
433.42 - 434.42 MHz, CE Frequency

PocketWizard is the brand name for a line of photography accessories which allows photographers to be more creative. PocketWizard radios are the industry leaders in wireless control and synchronization of cameras, flash lighting and light meters. The world headquarters are based out of Shelburne, VT USA where a small group of dedicated employees continue to build the PocketWizard brand as the “must have” photography accessory.

Take complete control over your wireless radio flash system with the FlexTT6 Transceiver from PocketWizard.
Compatible with nearly every PocketWizard radio and with support for Canon's latest cameras and flashes, this E-TTL / E-TTL II compatible transceiver will open the door to advanced off-camera lighting techniques.
As a combination transmitter and receiver, the FlexTT6 can function as both an on-camera master or as a remote slave, and it features a hot shoe on the top for using a flash both on-camera and off.

The FlexTT6 transmits to any PocketWizard receiving radio including the FlexTT5 and has all the great features photographers have come to rely on with our other TTL products: HSS, Patented HyperSync and Interference Free Reliability.
Also, it enjoys PocketWizard's ControlTL technology for both wireless TTL and Manual Power Control settings when working.

Video

Key Features

• ControlTL works with Canon's E-TTL / E-TTL II system to provide full TTL support with the latest cameras and flashes. It also provides the option for Manual Power Control for up to three zones as well as PowerTracking for automatic changes. Another benefit is an optimized High Speed Sync mode for shooting at shutter speeds up to 1/8000 second. Additionally, the Canon model has an optimized rear curtain sync method
• HyperSync technology uses advanced processing to enable faster sync speeds without requiring TTL and dedicated high-speed sync technologies
• A Pre-Flash Boost setting will help compensate for light loss over distance or through diffusion to help the camera accurately meter
• The FlexTT6 is compatible with all PocketWizard radios that operate with a 340-354 MHz frequency
• Users will enjoy a range of up to 800' when using TTL or up to 1200' when used as a basic trigger. This is assisted by a 2.7" rubberized antenna that can be tilted 180° for optimal positioning
• A basic trigger mode is available for use with other brand cameras and for simple manual operation
• Auto-sensing technology allows it to automatically switch between operation as a transmitter or receiver
• An Auto-Relay mode is available for triggering a remote camera as well as remote flashes
• A mini-USB port is available for using the PocketWizard Utility to install firmware updates
• Shoot at speeds within 1 fps of the camera's max fps when using TTL or at the camera's max fps when in basic triggering mode

Compatible Cameras

Canon: 5D Mark IV, 5D Mark III, 5D Mark II, 5D, 1D X Mark II, 1D X, 1D Mark III, 5Ds/R, 6D, 6D Mark II, 80D, 77D, 70D, 60D, 50D, 40D, 30d, 20D, 7D, 7D Mark II, T7i, T6, T5, SL1, XSi

For full feature compatibility, the latest firmware should be used.

Compatible Flashes

Canon: 600EX II-RT, 600EX-RT, 430EX III-RT, 430EX II, 430EX, 580EX II, 580EX

For full feature compatibility, the latest firmware should be used.

Specifications

• TTL Compatibility
  Canon E-TTL II
• Frequency
  CE model: 433.44-434.42 MHz EU/Asia/Other
• Channels
  35 Channels over 5 Frequencies (CE)
• Antenna
  6.9 cm rubberized with 180 degree swing
• Transmit output power
  Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)
• Mounting
  Hot Shoe, 1/4-20, lanyard, velcro
• Maximum Shooting Rate Frames per second (fps)
  8 fps for E-TTL II and normal triggering
• Power / Channel Switch
  OFF - C.2 - C.1
• Zone Select Switch
  A-B-C (matches Canon slave groups)
• Status Indicator
  LED: Green, Amber, Red status indications
• Camera / P1 Port
  3.5 mm stereo miniphone for 2-stage remote camera triggering. Port Voltage Handling: up to 50 Volts, 100 milliamp continuous
  Tip = Trigger
  Ring = Pre-Trigger
  Sleeve = Ground
• Flash / P2 Port
  3.5 mm mono miniphone. Port Voltage Handling: up to 200 Volts, 4 amps peak, 250 milliamp continuous, non-polarized
• Minimum Receive Contact Time
  Camera / P1 Port = 80 milliseconds
  Flash / P2 Port = 500us
• Voltage Present
  3.3 VDC (all pins) - safe for all cameras
• Hot Shoe voltage protection
  Hot Shoe: up to 50V
• USB
  USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground
• Operating Temperature
  Above -15° C and below 50° C
• Storage Temperature (without battery)
  Above -30 C and below 85 C
• Construction
  High impact plastic, captive battery door
  Hot Shoe made of glass reinforced resin
• Power
  Two (2) AA (IEC:LR6) Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed, USB
• Battery Life
  60 + Hours
• Dimensions
  9.2 cm long x 7.3 cm wide x 3.6 cm tall, antenna lowered
• Weight
  153 grams, 108 grams without batteries

Included in the box

• FlexTT6 Transceiver
• USB cable

PocketWizard is the brand name for a line of photography accessories which allows photographers to be more creative. PocketWizard radios are the industry leaders in wireless control and synchronization of cameras, flash lighting and light meters. The world headquarters are based out of Shelburne, VT USA where a small group of dedicated employees continue to build the PocketWizard brand as the “must have” photography accessory.

The smallest PocketWizard radio ever, the MiniTT1® Transmitter is part of a new generation of PocketWizard radios providing E-TTL II and power control capabilities with Canon Speedlites and select studio lights.  Your creativity also extends far beyond X-Sync speeds with HyperSync™ Automation and FP Sync capabilities.
 
The MiniTT1™ Transmitter locks onto the camera’s hot shoe supporting an on-camera flash with its own hot shoe while working with remote PocketWizard units. Remotes can be one or more PocketWizard FlexTT5™ Transceivers connected to Canon E-TTL II flashes or any PocketWizard Receiver for triggering flash or remote cameras.
 
The MiniTT1 Transmitter is easy to use; just slide in place and begin to shoot.  The new PocketWizard ControlTL™ System interprets the complex E-TTL II data being sent through the camera’s hot shoe and digitally transmits it in a reliable radio signal. Change the flash compensation dial on the camera, and those commands pass seamlessly through the system to your remote flash.  Adjust your aperture or ISO and the system corrects for those changes.
 
Add the PocketWizard AC3 ZoneController to easily adjust up to three zones of light independently, in both E-TTL II or manual, with six stops of power adjustment. PocketWizard ControlTL radio communication allows you to shoot farther, faster, around corners, through walls even at high noon in bright daylight.  Now you can deploy a wireless i-TTL flash system wherever you want, without infrared limitations, in seconds.
 
Take advantage of PocketWizard’s patent pending HyperSync Automation Technology that allows camera sync well above your standard x-sync limitation with full power flash.   HyperSync Automation automatically adjust the timing of your flash trigger so that faster than X-sync speeds can be achieved.  With certain Canon camera and flash combinations you can achieve sync all the way to 1/8000th of a second.  Just imagine what you can do using flash in bright sun with wide open apertures and fast shutter speeds.  Since HyperSync is a trigger function you can use any PocketWizard Receiver including the FlexTT5, PlusII or MultiMAX.
 
With Canon Speedlights you can also use FP/High-Speed Sync mode and shoot at any shutter speed with compatible E-TTLII flashes.  With radio wireless, how you can use this amazing feature in bright daylight automatically.  No buttons to press or settings to change other than your shutter speed will give you flash sync all the way to 1/8000th.

340.00 - 354.00 MHz, US FCC / IC Frequency
433.42 - 434.42 MHz, CE Frequency

PocketWizard is the brand name for a line of photography accessories which allows photographers to be more creative. PocketWizard radios are the industry leaders in wireless control and synchronization of cameras, flash lighting and light meters. The world headquarters are based out of Shelburne, VT USA where a small group of dedicated employees continue to build the PocketWizard brand as the “must have” photography accessory.