Photo tips - Learn to use barndoors

Why use Barndoors on a flash?

Discover the benefits of using OCF Barndoors for the Elinchrom ONE. It helps create, shape, and control hard light on the go. This is the first part series of OCF accessories for your Off-Camera flash unit.

An OCF Accessories series by Quentin Décaillet

Why use Barndoors - Quentin Décaillet

Like many photographers, I started flash photography with accessories such as the Elinchrom Rotalux Deep Octa Softbox. The Rotalux are amongst the best softboxes out there. They produce beautiful soft and diffused light that helps you create flattering portraits.

However, with time, I started experimenting with hard light using small reflectors. One of the tools that I’ve come to love is the Barndoors because of their flexibility.

From standard to OCF

Reflector 21cm with

ONE with OCF barndoors

Elinchrom has offered Barndoors for the 21cm reflector for a while, and it works amazingly well for studio work. With the recent introduction of the Elinchrom ONE and the OCF mount, it was time for an OCF version of the Barndoors. More portable than the 21cm reflector, the OCF Barndoors can be mounted directly on the ONE or any OCF compatible unit. This direct mounting system is terrific for any photographer on the go or working on very tight lighting setups.

Control hard light

Barndoors is such an affordable and helpful piece of equipment that I’m convinced it should be in any photographer’s kit! As the name implies, these are small doors to block the light beam in specific directions. It works in the same way as flags would, except that they are placed directly on the light, and so you don’t need additional stands or clamps to flag the light – making it very practical for on-location shoots.

Elinchrom ONE with barndoors | Flag with stand

ONE with OCF barndoors

Flag with stand - accessory arm

It has different purposes in real-life scenarios, and it can be used for any genre. From product to portrait and even wedding photography, I don’t see a reason not to have the OCF Barndoors along with your Elinchrom ONE on every shoot.

Avoid bounced light

The easiest way to create hard light is to use a bare bulb flash or a small reflector such as the Elinchrom Standard 21cm reflector. Both work nicely but come with one major flaw: there’s no way to control precisely where the light will bounce. This may lead to color casting issues and reduced contrast because of the light reflecting on every wall and object in the room you’re shooting in. Using Barndoors, you can precisely control the beam of light.

Why use Barndoors - Quentin Décaillet

For example, if you want only to light your subject and block the light from bouncing on the walls and the ceiling, you close the doors parallel to the beam so the light can’t go anywhere but forward.

It’s that simple!

It does wonders if you are shooting portraits in a colored room and want to avoid any color casting on your subject. It’s also fantastic if you have a white wall next to your subject but don’t want to use it as a fill and would rather keep a stronger contrast.

Why use Barndoors - Quentin Décaillet

W/o barndoors - Low contrast

With barndoors - High contrast with sharp shadow edge

I had to do a recent product test shoot at home; the Barndoors came in handy as I had to avoid getting any bounce light. It was for an e-commerce lighting proposition, so I had to get my colors rights.

Living in an apartment made mainly of wood, if light were to bounce around, I’d get weird colors in shadows, which would require much editing. With the Barndoors, I could easily control the light beam and have much cleaner shadows.

Why use Barndoors - Quentin Décaillet

If the contrast gets too strong because there’s no fill anymore, I could simply add a fill card next to the product and make sure I get a clean and neutral fill light instead.

Why use Barndoors - Quentin Décaillet

W/o fill card

With fill card

Harder than hard light

The initial idea behind the Barndoors is to control where the light goes and avoid unwanted light bounces. However, it comes with another great use for hard light lovers. If you close the doors and leave only a tiny opening for the light to escape, it essentially creates an even harder light source than when shooting bare bulb. The smaller the light source in relation to the subject, the harder the light is.

So indeed, Barndoors can be used to create a tiny light source, similar to a snoot but in a more rectangular shape and with the control offered by the doors.

Why use Barndoors - Quentin Décaillet

Product photographers looking to mimic the sun and summer-like razor-sharp shadows will love the OCF Barndoors for this use. Just be mindful that it may result in light loss, and so you’ll have to bump up the power of your strobe to compensate for it. But other than that, it’s fantastic and can do wonders when you don’t have the space to carry a full-size snoot along with you.

Why use Barndoors - Quentin Décaillet

Flash tube w/o OCF Barndoors

Flash tube with OCF Barndoors

In my product test shoot, as you can notice, when I put on the Barndoors, I was able to get much more defined shadows. They are razor-sharp, whereas previously, they were a bit soft. One is not better than the other, but it’s great to offer a variety of choices to clients in such scenarios and know how to create such light effects.

Creative light with Barndoors and LED

When I first got my hands on Barndoors and started using them, I noticed how excellent the result was with just modeling light on. As the LED is a lot more directional than the flash tube, the beam of light when using Barndoors is very defined.

Let me explain what I mean by that.

Why use Barndoors - Quentin Décaillet

Flash with barndoors

LED with barndoors

The Barndoors will avoid the light hitting everything and anything around it when using the flash. However, it won’t create a sharp and defined beam of light like a projector or fresnel would as there is no optical element to focus the light. The goal of the flash tube isn’t to push light in one direction but instead in all directions to make the most of your beautiful light shapers.

If that wasn’t the case, unique softboxes such as the Litemotiv 190 Indirect wouldn’t create such an outstanding light quality. However, most LEDs are a lot more directional.

Why use Barndoors - Quentin Décaillet

The combination of a LED light – such as the Elinchrom ONE’s pilot lamp – and Barndoors will let you create a defined beam of light similar to that of light creeping through a cracked door. Then you can adjust how sharp you want the effect to be.

The closer to your subject, the more defined the Barndoors shadows will be. The further away, the less visible the effect will be.

Quentin Décaillet
Webb

Quentin Décaillet
Instagram

Elinchrom ONE | Off Camera Flash Kit

EL-20932

Always be ready when inspiration strikes with the supremely compact and lightweight Elinchrom ONE. With only 1.5 kg, the ONE merges 131Ws of capacity with features including an integrated Li-ion battery, USB-C Active Charging, TTL, HSS, and a streamlined touch interface into a low profile housing. A portable, rugged and dependable off-camera flash equipped for your next adventure. Wherever that will be.

Super compact - Only 1.5 kg
725 flashes at max power
TTL/HSS
Active Charging via USB-C
Touchscreen
LED for video - Adjustable color temperature
Bluetooth and WLAN
Elinchrom App for iOS and Android
Elinchrom Studio Software for computer

Elinchrom ONE - In your hand

Digital Camera World review of Elinchrom ONE - Five Stars

Five Stars to Elinchrom ONE

Digital Camera World is the world's fastest-growing photography website. In a review, they give the Elinchrom ONE the maximum rating "Five Stars".
"The Elinchrom One is a powerful, portable, versatile monolight that delivers fantastic performance in a tiny footprint."
"And you can keep on shooting when the battery is dry, by plugging in a USB source – either via mains power or a USB power bank, which is an absolute godsend when working on location (and isn't possible on the Profoto or Godox)."
"It has a beautiful and intuitive touch menu system..."
"The Elinchrom One is a fantastic flash unit for freezing motion, overpowering the sun with high speed sync, shooting products and portraits in studio or events and lifestyle on location. "
Read the full review in the links tab.

Video Elinchrom ONE

Keep a low profile

Add the versatility of an off-camera flash with light shaping capabilities to any kit while maintaining a minimal footprint with the Elinchrom ONE. Similar in size and weight (1.5kg) to a 70-200mm lens, the ONE is ready to travel with you anywhere and everywhere.

Elinchrom ONE - Small size

Brave the elements

The Elinchrom ONE utilizes a sealed Li-ion battery for maximum portability and enhanced protection from the elements while on location. Plus, you are not tied to proprietary spare batteries or chargers with the ability to charge from any USB-C source.

Elinchrom ONE - Sealed Li-Ion battery

Never lose momentum

Capable of producing 725 full-power flashes on a single charge, the Elinchrom ONE is ready for longer shoots. Additionally, with Active Charging, the ONE can be connected to a power source and continue shooting while charging regardless of the battery’s power level, keeping your workflow uninterrupted.

Shape your story

Shaping light is at the heart of every great photo you create. Designed around an unconcealed flash tube for optimal light spread, the Elinchrom ONE ensures you experience the beautiful light quality Elinchrom is known for.

Elinchrom ONE - Shape Your Story

Your choice of light modifiers

Engineered to use the newly developed Elinchrom OCF modifier mount, the Elinchrom ONE is also natively compatible with most Profoto® OCF light shapers, greatly expanding your selection of available light shaping tools. The included Elinchrom OCF to Bayonet Adapter enables quick mounting to speedrings and reflectors using the traditional Elinchrom bayonet.

Elinchrom ONE - Adapter System

Do more with less

Engineered for peak efficiency, the Elinchrom ONE utilizes its 131 Ws of capacity to generate a light output usually seen in 200+ Ws units. At 1 meter and 100 ISO, the ONE can achieve F-11.9, with the Diffusion Dome attached, and when combined with the HP Reflector, the achievable F-Stop climbs to F-45.2.

Elinchrom ONE - Engineered for peak efficiency

Navigate swiftly

With a touchscreen interface and a newly designed menu structure, experience a streamlined access to the ONE’s settings to ensure you never miss a chance to capture the moment.

Elinchrom ONE - Navigate swiftly

Supreme portability
Weighing only 1.5kg (3.3 lbs) and similar in size than a 70-200mm lens, the ONE is ready to travel with you anywhere and everywhere.
Integrated Li-Ion battery
Enables up to 725 full-power flashes on a single charge and enhanced protection from the elements while on location.
USB-C charge port
Charge the Elinchrom ONE from any USB-C source without proprietary spare batteries or chargers.
Active Charging
Connect the Elinchrom ONE to a power source and continue shooting while charging regardless of the battery’s power level.
Elinchrom OCF modifier mount
Natively compatible with Profoto OCF and the traditional Elinchrom bayonet mount via an included adapter.
Touch screen interface
Clever and streamlined interface designed to provide the most efficient user experience and quick set up times.
Powerful bicolor LED modeling lamp
Adjustable color temperature of 2700 to 6500 with an output of 3000 Lumens and a CRI 95.
Fast recycle times and precise color accuracy
The ONE recycles in 0.9 seconds at full power and maintains a +/- 150K color temperature over the entire power range.
Sync up to 1/8000s with HSS
Freeze motion, overpower ambient light and darken backgrounds.
TTL with Manual Lock
Enables a quick switch from TTL to manual without losing exposure settings.
Smart Pro-Active Cooling
The Elinchrom ONE learns your shooting style and adapts its cooling cycle around it.
Removable tilt-head
The two-way metal tilt-head with 7-8 mm umbrella mount detaches, making the Elinchrom ONE ergonomic for hand-holding.

Elinchrom ONE - Off Camera Flash kit

In the box

Elinchrom ONE
Elinchrom OCF Adapter
Elinchrom OCF Diffusion Dome
Elinchrom 65W USB-C Wall Charger
Elinchrom USB-C Cable 1.8 m
Elinchrom ONE Case

Specifications Elinchrom OFF Camera Flash

Specifications	Elinchrom ONE	Elinchrom THREE
Energy	131 Ws	261 Ws
F-Stop (1m, 100 ISO, HP Reflector 26 cm, max power)	f/45.2	f/64.3
F-Stop (1m, 100 ISO, OCF Diffusion Dome, max power)	f/11.9	f/22
Power range (F-Stop)	5 f-stop	6 f-stop
Power range (Ws/J)	7-131 Ws	7-261 Ws
Power range display	0.1-4.3 (Elinchrom scale) / 5.8-10 (10 scale)	0.1-5.3 (Elinchrom scale) / 4.8-10 (10 scale)
Power increments in Manual / TTL mode	0.1 F-Stop / 0.3 F-Stop	0.1 F-Stop / 0.3 F-Stop
Flash duration t0.1 min/max power (Standard mode)	1/1530 - 1/155 sec	1/1550 - 1/255 sec
Flash duration t0.1 min/max power (Action mode)	1/7000 - 1/625 sec	1/8500 - 1/440 sec
Recycling time min/max power	0.06 / 0.9 sec	0.08 / 1.2 sec
Flash mode	Manual / TTL / HSS (with Transmitter Pro)	Manual / TTL / HSS (with Transmitter Pro)
Action mode	Faster flash duration over the power range	Faster flash duration over the power range
TTL Function	Yes, with Transmitter Pro	Yes, with Transmitter Pro
HSS Function	Yes, with Transmitter Pro	Yes, with Transmitter Pro
Flash colour temperature at max power	5900 K (Action) / 5600 K (HSS)	5900 K (Action) / 5600 K (HSS)
Flash colour stability over the power range (all modes)	± 150 K	± 150 K
Power stability	± 0.5%	± 0.5%
Beam Angle (degrees)	160°	160°
Auto power dumping	Adjusts power settings automatically in real time	Adjusts power settings automatically in real time
Fan cooled	Smart proactive cooling	Smart proactive cooling
Input	USB-C	USB-C
IP Class	IP20	IP20
Flash Tube	EL-24091	EL-24091
Battery
Battery	Li-Ion - Built-in - 41.04Wh	Li-Ion - Built-in - 41.04Wh
Battery capacity min/max power (LED lamp OFF)	9700 / 725	11250 / 525
Battery capacity min/max power (LED lamp ON 100%)	9000 / 420
Battery charge status	On the display if ON and side logo if OFF	On the display if ON and side logo if OFF
Charging time (with 65W USB-C Wall Charger)	60 m (80%) – 80 m (100%) / Fast charge (unit ON) 80 m (80%) – 100 m (100%) / Slow charge (unit OFF)	60 m (80%) – 100 m (100%) / Fast charge (unit ON) 80 m (80%) – 135 m (100%) / Slow charge (unit OFF)
Charging time (with 18W 20000 mAh Power Bank) USB-C sources need to be able to deliver at least 25W for fast charge to be activated	80 m (80%) – 135 m (100%) / Fast charge (unit ON) 105 m (80%) – 180 m (100%) / Slow charge (unit OFF)	80 m (80%) – 135 m (100%) / Fast charge (unit ON) 105 m (80%) – 180 m (100%) / Slow charge (unit OFF)
LED
LED modeling lamp modes	ON/OFF, free, proportional, VFC	ON/OFF, free, proportional, VFC
LED modeling lamp power	20W / equivalent to 120W / 3000 lm / CRI 95	20W / equivalent to 120W / 3000 lm / CRI 95
LED modeling lamp color temperature	Presets from 2700 K to 6500 K	Presets from 2700 K to 6500 K
LED run time (LED only, min/max power)	10 hours / 90 minutes	10 hours / 90 minutes
Radio
Skyport (built-in)	20 frequency channels, 4 Groups	20 frequency channels, 4 Groups
Skyport distance range (Transmitter Pro, manual mode)	Indoor: up to 60 m / Outdoor: up to 200 m	Indoor: up to 60 m / Outdoor: up to 200 m
Bluetooth® (built-in)	Version 4.2 / Compatible Studio Software Win, Mac, iOS, Android	Version 4.2 / Compatible Studio Software Win, Mac, iOS, Android
Skyport Frequency	2404~2478MHz	2404~2478MHz
Bluetooth® Frequency	2402~2480MHz	2402~2480MHz
WLAN	2412~2472MHz	2412~2472MHz
Size
Umbrella fitting (on tilt head)	7-8 mm	7-8 mm
Dimensions with Diffusion Dome and tilt head	25.3 x 16.5 x 10.5 cm	23.3 x 16.5 x 10.5 cm
Dimensions without Diffusion Dome and tilt head	24.5 x 10 x 10 cm	22.5 x 10 x 10 cm
Weight (with/without tilt head)	1.5 kg / 1.3 kg	1.65 kg / 1.45 kg

Product FAQ

Yes. Elinchrom ONE & THREE has built-in Bluetooth and you can control ONE & THREE with Elinchrom Studio Software and/or the iOS App/Android App. In addition, ONE & THREE have a built-in Skyport Bridge so they communicate automatically with older Elinchrom flashes that can also be controlled via smartphone and computer.

Active Charge is a function that allows you to charge the flash's battery while you are shooting. The connection on ONE & THREE is USB-C, which makes it possible to use a USB-C power adapter or power bank to charge the built-in battery while the device is being used.

To lock the touchscreen on the ONE & THREE, press the ON button while turning on the device for 9 seconds. The lock symbol indicates that the touchscreen is locked, to unlock, turn the device OFF and ON again.

It is perfect to use the built-in LED light on ONE & THREE as lighting for film and video production. The light quality is very high, which means that colors and skin tones are reproduced correctly. In addition, the LED light can be adjusted in brightness and the color temperature can be adjusted in fixed steps from 2700K to 6500K. The brightness of the LED light is approx. 3000 Lumen and corresponds to a halogen lamp of approx. 120W

ONE and THREE have an OCF mount for light shapers as standard, which gives access to a large range of light shapers from different manufacturers. In addition, an adapter for Elinchrom bayonet is always included when you buy ONE & THREE, which means that the entire Elinchrom range of light shapers fits.

Yes, at our service the battery can be replaced but this type of question is mostly asked by prospective owners of ONE & THREE, very rarely by users as battery capacity and battery life is first class on Elinchrom products. The built-in battery has a very high capacity, which combined with advanced control of battery charging gives a very long battery life. The combination of built-in battery with high capacity and Active Charging via USB-C connection gives ONE & THREE unique performance. Tip! Always charge the battery after shooting. A completely discharged Li-Ion battery can be damaged if it is left for a long time without maintenance charging.

Elinchrom are a Swiss studio lighting manufacture famed for their consistent innovation and being at the forefront of both portable and studio photographic lighting equipment. Since the start in 1962 Elinchrom have continued to develop and innovate flash lighting, groundbreaking products. Elinchrom studio and portable lighting solutions are available for both professionals and those just getting started with flash photography.

Price, VAT excl.5 200.00

Price6 500.00

In stock

Buy

Elinchrom Transmitter Pro

EL-193

The Elinchrom Transmitter Pro offers more convenience and reliability than any other wireless triggering system. Powered by 2.4 Ghz bandwidth, the transmitter enables remote control and triggering capabilities over 40 frequency channels of 4 groups per channel with the range extended to up to 200 m

New Visual Feedback Interface

The Large LCD display of the Transmitter Pro features two-way control via a new Visual Feedback Interface that lets you see the exact power of every light in your setup right on the transmitter. Users control each light’s power level and modeling lamp setting directly from the Skyport transmitter, which instantly shows the updated power settings. This provides unsurpassed levels of "two-way communication and control" for every light in your setup right from your camera.

Hi-Sync opens up the world of flash photography to explore even further

Elinchrom Hi-Sync technology lets you go beyond the X-Sync of your camera. Photographers can simply switch to Hi-Sync mode and access sync speeds up to 1/8000s to freeze motion, overpower the sun, darken backgrounds or use a wider aperture. The new ODS (Over Drive Sync) enables users to fine tune the Transmitter Pro transmitter’s trigger signal to optimize exposure at high shutter speeds while gaining up to 2 more f-stops of light.

The Transmitter Pro has 20 frequency channels that can be used for either Normal or Speed mode. The transmitter attaches easily and securely to the hotshoe with its one-touch quick-lock mechanism, and is powered by 2x AA batteries. It also features an integrated AF Illuminator for faster focusing and a mini-USB socket for firmware updates. Users can instantly distinguish what sync mode they are in as the backlit display glows green for normal sync mode, and red for speed sync mode. They can also enjoy a range of up to 656ft (200m) outdoors, and up to 196ft (60m) indoors.

The Transmitter Pro continues the Elinchrom commitment to quality; providing photographers with tools to enhance their shooting experience while also showing how Elinchrom is looking firmly ahead to the future. The Transmitter Pro represents a seamless extension of the EL-Skyport family since it is also compatible with the three previous generations of flash units (including the EL- Skyport Transceiver RX module for Style RX, Digital RX, and Ranger RX systems, and the integrated EL-Skyport modules for the BRX, D-Lite RX, ELC Pro HD, and ELB series.) The Transmitter Pro adds synchronization capability and "two-way control" functionality to all Elinchrom lights with EL-Skyport capability.

The Transmitter Pro is the first in a long list of exciting engineering collaborations with design partner, Phottix and allows Skyport to boast the best quality, reliability and range ever available.

Elinchrom Transmitter Pro Features:

Large LCD with unique, real-time display of remote flash power settings
Easy access buttons and Digital Dial for fast setup and control
20 Channels*, 4 Groups for Normal and Speed Sync Modes
Hi-Sync, up to 1/8000sec with Sony, Canon and Nikon cameras
Extended working range up to 656ft (200m)
AF Illuminator and sure-lock mounting foot
USB port for future-proof upgrades

The Transmitter Pro is currently available for Canon, Nikon, Sony and Olympus/Panasonic.

Specifications

Frequency Band 2.4 GHz
Channels 40; (20 in Normal mode – green / 20 in Speed mode – red)
Groups 4: 1, 2, 3, 4
Flash synchronization Normal: limited to the native X-sync of your camera
Hi-Sync mode: up to a 1/8000 sec. 2nd curtain sync: only Canon
Range: Up to 200m for triggering
Infrared AF Assist Beam: Yes
Connection Foot for Canon hotshoe (19366), Sony hotshoe (19371) and Nikon Hotshoe (19367)
Mini-USB for firmware updates 2.5 mm remote release
Power source 2x AA batteries
Indicators and Controls
LCD screen display:
Sync mode, group, channel, ODS activation, Hi-Sync activation, shutter mode, remaining battery power, flash unit name, flash unit ID, flash unit power level, flash unit modelling level
Buttons:
Group selection, test, rotation ring to change values, confirmation, on/off and refresh.
There are also 4 buttons with variable functionality: Power +/-, Modelling lamp off/prop/free, Individual unit selection and setup on the dashboard. Menu up, menu down and exit in the setup menu.
Dimensions: 84.1 x 68.3 x 58.5 mm (3.3 x 2.7 x 2.3")
Weight: 120 g without batteries

In the box

Elinchrom Transmitter Pro
(2 x AA batteries are not included due to new air transport regulations)
Mini-USB cable
2-year warranty

”The Skyport HS offers convenience and reliability that hasn't been available with any transmitter before now. It also incoperates so many new advanced features and options that it opens up a whole new world in flash photography. I haven't been this excited about a new product announcement in a long time!"

Michael Clark - Adventure Photographer

Price, VAT excl.1 389.99

Price1 737.49

In stock

Choose

Elinchrom OCF Barndoors

EL-26002

The OCF Barndoor with four trapezium-shaped metal barndoors can be mounted directly on any Elinchrom OCF or Profoto® OCF flashes. The 4-way design allows you to diminish light spread in all directions and therefore keep light from unwanted areas.

Prevents light spillage
Prevents unwanted reflexes
Fits Elinchrom OCF and Profoto OCF

Light Control

The OCF Barndoors prevent light spills that cause unwanted lens flare. The four trapezium are painted in matte black to absorb light for greater control and minimizes reflections.

Direct fit

Created for use on all units utilizing the Elinchrom OCF or Profoto® OCF mount, the Elinchrom OCF Barndoor mounts without using an adapter.

Price, VAT excl.490.89

Price613.61

In stock

Buy

Elinchrom OCF Gel Dome Kit

EL-25112

Transform your photos with the Elinchrom OCF Gel Dome Kit. The set includes high-quality color gels for exceptional lighting effects and color correction. Ideal for photographers looking to express their creativity. The Elinchrom OCF Gel Dome Kit includes 6 coloured Diffusion Dome. They serve double duty as both a coloured modifier producing softer light with an even spread to use with other accessories and a protective, polycarbonate cover for Elinchrom Off-Camera flashes with unconcealed flashtubes.

Versatile Lighting Control
Seamless Integration - Designed for Elinchrom and Profoto® OCF mount systems
Dual-Purpose Functionality.
Creative Color Options
Durable and Reliable Protection

Versatile Lighting Control

The kit features 6 high-quality colored diffusion domes, allowing photographers to achieve vibrant lighting effects and precise color correction for any creative scenario.

Seamless Integration

Designed specifically for Elinchrom and Profoto® OCF mount systems, the gel domes offer a direct fit without the need for adapters, ensuring quick and effortless setup on compatible off-camera flashes.

Dual-Purpose Functionality

Each colored diffusion dome not only enhances your lighting effects but also serves as a protective polycarbonate cover for off-camera flash units, combining performance and protection in one accessory.

Creative Color Options

The kit includes a diverse range of colors—Daffodil Orange, Ultramarine Blue, Traffic Purple, Luminous Yellow, Traffic Red, and Luminous Green—allowing photographers to experiment with dynamic color effects in their shots.

Durable and Reliable Protection

Made from high-quality polycarbonate, the gel domes offer robust protection for exposed flash tubes, ensuring your equipment remains safe during transportation and outdoor shoots, extending the lifespan of your gear.

Price, VAT excl.506.39

Price632.99

In stock

Buy

Elinchrom Tripod Air Click 105-244cm

EL-31038

Elinchrom Tripod Air Click 105-244 cm. Click designed with a twist. The Click mechanism on these stands enables them to be stacked in both planes, ensuring that they can be carried in the most convenient way – either edge to edge or face to face to suit your carrying bag. The Elinchrom Air-cushioned system offers a very smooth and convenient balance between speed of use and security.

Elinchrom Stand Air Click 105-244cm

Compact lighting stand that is stackable in two levels, wide side or short side. Adjustable in height 105 to 244 cm, maximum load 5 kg.

Stackable stand

Elinchrom Tripod Air Click can be attached to each other, which facilitates transport and storage. Thanks to the fact that the stands can be stacked wide side against wide side or short side against short side, they can be easily attached to different types of photo bags.

Elinchrom Tripod Air Click

Low weight

The stand weighs only 1.3 kg and can carry a full 5 kg. Folded length is 92 cm.

Column with air damping

Elinchrom Stand Air Click can be adjusted in height from 105 cm to 244 cm. The desired height is locked with a knob, and air cushioning prevents the column from rapidly lowering in height.

Elinchrom Lightning Stand Air Click

Specifications

Folded Length	92 cm
Extended Size	244 cm
Floor Diameter min-max	74-112 cm
Max Load	5 kg
Weight	1.3 kg
Leg Diameter	19 mm

Price, VAT excl.477.97

Price597.46

In stock

Buy

Tether Tools Rock Solid A Spring Clamp 2 | Black

RSPC2F-BLK

Tether Tools Rock Solid A Spring Clamp is an essential accessory for photographers, videographers, and other creative professionals. This versatile clamp is designed to securely hold a wide range of objects in place, making it an indispensable tool in the studio or on location. The Rock Solid Pony A Spring Clamp 1 inch in non-reflective black with Coated Handle and Tip features spring-operated jaws that hold a variety of material efficiently and securely. Ideal photography and video uses include securing backdrops, bounce cards, shot lists, scripts and reflectors or just about anything where an extra set of hands is helpful. The color is matte black in order not to give color casts during product photography.

The clamp is designed for pressure clamping and when speedy application and removal are important. The handles and tips are polyvinyl-coated for comfort and protection. The "A" Clamp is available in 1" or 2" clamp jaw opening width. Made in the USA.

Specifikationer

Non-reflective black, No color casts during product photography
Ideal clamp pressure for light clamping and speedy application and removal
Nickel plated steel jaws
Heavy-duty tempered steel springs
Polyvinyl handles and tips
Point-of-pressure remains near jaw

At first glance, the Rock Solid A Spring Clamp may appear to be a simple and straightforward tool. However, its strength and versatility make it an indispensable item in any photographer's kit. With a clamping force of up to 10 pounds, this clamp can hold a wide variety of objects securely in place, from backdrops to light modifiers to cables.

Construction

One of the standout features of the Rock Solid A Spring Clamp is its construction. The clamp is made from high-quality materials, including a durable metal frame and a non-slip rubber coating on the jaws. This combination of materials ensures that the clamp will withstand heavy use and remain securely in place without damaging the object being held.

The Rock Solid A Spring Clamp is also designed with practicality in mind. The jaws of the clamp can open up to 5,1 cm wide, making it easy to secure objects of varying sizes. Additionally, the clamp features a spring-loaded design, which makes it easy to open and close with one hand. This is particularly useful when working alone or when needing to make quick adjustments to the position of a light or other object.

Female socket on the bottom

Another benefit of the Rock Solid A Spring Clamp is its versatility. The clamp includes a threaded female socket on the bottom, which allows it to be attached to a variety of mounting options, such as light stands or tripods. This feature makes it easy to position the clamp in the desired location, regardless of the type of equipment being used.

Matte black color

In addition to its functional features, the Rock Solid A Spring Clamp also has a sleek and attractive design. The clamp is finished in a matte black color, giving it a professional look that will blend seamlessly with other studio equipment. It is also compact and lightweight, making it easy to transport and store when not in use.

Overall, the Tether Tools Rock Solid A Spring Clamp is an indispensable tool for photographers, videographers, and other creative professionals. Its strength, versatility, and practicality make it an essential item for any studio or location shoot. With its durable construction and sleek design, this clamp is sure to become a go-to tool for photographer and videographers.

Tether Tools first product introduced in 2008, the Tether Table Aero, has a long, rich history. Crafted out of a need for photographers to have a professional, secure workstation when shooting out in the field or in studio, the Tether Table Aero provides a stable portable tethering platform. Since then, Tether Tools has worked to design and manufacture tools that expand the possibilities of photographers, videographers, and creatives in all fields. It’s why they are here, it’s the beating heart of their business. Tether Tools products are used by creatives across the globe as an essential piece of their workflow and safety on set.

Price, VAT excl.54.90

Price68.63

In stock

Buy

Elinchrom OCF Wide Reflector 16 cm

EL-26090

The Elinchrom OCF Wide Reflectors suit photographers who need a bright single light source for even illumination with umbrellas and backgrounds, copy work or large groups photography.
This OCF Wide Reflector is Umbrella compatible.