An Introduction to Buying Studio Flash

A guide to purchasing your first strobe for studio photograph. To make the purchase a little easier, we've put together a few points to consider before you invest. You are also very welcome to contact us if you have any questions. You can always reach us at info@aifo.se.

Start by looking at how others are doing!

A good way to learn something new is to look at how others do it and then pick out what you think is good. We have produced several videos where we present products and show how they can be used.

Here you will find all our videos »

Video - Get started with studio photography

Check out this webinar where we talk about how a studio flash works and give tips on some lighting for portrait photography.

How strong do the flashes need to be?

Often the price difference can be relatively small between flashes with different maximum output power in a model series, but remember that stronger is not always better. Choose a flash that has an effect range that is adapted to the type of subject that you mainly photograph.

Face portraits need little output due to the size of the subject, a relatively large lens aperture (short depth of field is often desired for portrait photos) and that one likes to place the light source close to the subject. Power set to 20-50Ws per lamp head is usually sufficient for this.

Product photography generally requires more light because you usually want a large depth of field = small aperture on the lens. This requires more light from the flash. Should you e.g. photographing a sofa may require approx. 400-500Ws from each flash.

For portrait photography and groups of up to 4-6 people, flashes with a maximum power of 200-250W work best. Should you photograph e.g. a football team, you choose a flash with a strength of 500Ws or stronger.

Elinchrom studio flash

Is two flashes enough?

Most Elinchrom flash sets contain two flashes, which goes a long way. One light source is used as main light and the other as fill light or similar.

It is more important to choose a good quality flash model than to choose a set that contains many flashes of inferior quality. Elinchrom flashes maintain the highest quality in terms of safety, construction and light stability (even exposure and color temperature over long image series).

Our advice is to start with one to two flashes and then gradually add more light sources

Elinchrom studio set

Are all the accessories I need available?

To be able to develop your photography, you must choose a flash system that has a large selection of flash models, light shapers and other accessories.

Elinchrom has flash models adapted to different levels and types of photography as well as one of the market's absolute largest accessory programs of light shapers.

Choose the flash model adapted to your needs

Elinchrom has several model series adapted for different areas of use.

In addition to the strength of the flash, it is important to choose a flash model adapted to how much you photograph. There is a big difference between a studio flash for hobby use and one to be used professionally. The difference is that a flash for professional use is designed to handle high, intensive loads during long working days. All components such as flash tubes, capacitors, cooling system, mechanical construction are dimensioned for this, which of course is not required by a studio flash for hobby use.

Elinchrom has divided its flashes into different model series:

Starter Flashes designed for those who want to start photography with studio flash. Also excellent flashes for the small company that periodically needs to create its own image material. Low price combined with high quality.

Pro TTL Very versatile flashes intended for professional use, while the ease of use makes them suitable for all levels of photographers. TTL automatically provides the correct exposure from the first image and HSS the freedom to freely choose the camera's shutter speed down to 1/8000 second.

Pro Exclusive flashes with performance and function adapted to the highest requirements. Suitable for high production tempo over long periods of time and photography that requires super-fast upload times, short burning times, special functions, etc.

Inside or outside?

Do you have your own studio? Do you primarily want to shoot outdoors? Should the equipment be picked up and taken down at each shoot?

Think about how and where you are going to photograph and choose the flash that is best suited for this. If you do not have a surface where the flashes can be set up between shots, it is important to choose equipment with a compact size and that is easy to pick up and take down. Umbrellas and Rotalux softboxes are light shapers that are very easy to handle.

Will you often take the equipment to another location? Low weight and robust construction that can withstand transport are then important.

Do you shoot mostly outdoors? Choose a battery-powered studio flash that is built for the demands of outdoor environments.

Elinchrom Studio flash with battery

Why choose Elinchrom

There are a number of flash brands on the market with varied range, quality and price level.

Elinchrom has been manufacturing flashes since 1963 and today has the market's most complete range of flash models with accessories at a very attractive price level.

Construction and Safety - A charged studio flash contains extremely high charge voltage and can be downright dangerous to use if the design is not reliable. Elinchrom has long experience in manufacturing and designing studio flashes and places the highest demands on material selection.
Stability - One of the biggest reasons for using studio flash is to gain control over the light. A flash that in a series of 10 images gives varied exposure results and color temperature (very common with less reputable brands) is not to be trusted and means that you will quickly tire of the flash and in the worst case get a bad reputation as a photographer with lost customers as a result.
Reliability - Elinchrom has a very long service life on all products and leads the development of new innovations.
Service and Support - We believe in first-class service. Elinchrom has a well-developed service organization around the world. Spare parts and service are an obvious part of our organization and we stock flash tubes and spare parts for all models. Aifo AB has an extensive dealer network in Sweden, Norway and Denmark, which means that you can often buy and receive support locally.
Rent - We offer the possibility to rent flashes and light shapers. This means that you can rent different flashes before buying or rent extra flashes and light shapers if you only need them for a short period.

Short glossary of photo terms

Here is a small explanation of words and specifications that are often mentioned in connection with studio flashes.

Power Range -A studio flash can be adjusted up and down in strength without affecting color temperature. Elinchrom studio flashes can control over 5 to 8 f-stops, depending on the model, with 1/10 f-stop precision.
Stability — What i.a. what separates a good studio flash brand from a worse one is the ability to deliver flash light that does not deviate in exposure or color temperature over long bursts of images regardless of the set effect.
Charge Time - The time it takes for the flash to recharge between exposures.
Flash Duration - The time between the flash tube firing until it goes out. When shooting with studio flash, it is the focal length that determines how sharp a moving subject can be reproduced.
Modeling light - Elinchrom studio flashes have both a lamp and a flash tube. The lamp, the setting light, lights up before exposure to facilitate lighting.
Photocell — Elinchrom studio flashes have a small light-sensitive photocell that triggers the flash when another flash is fired. On some models, Elinchrom has an advanced variant of photocell called Eye-Cell which can be used to use the studio flash as a slave flash for regular camera flashes. Since all camera flashes emit a number of pre-flashes before exposure, the Eye-Cell function is required for the studio flash to ignore the pre-flashes and fire only on exposure.
HS (High Sync) - Normally, cameras can only use shutter speeds that are within the camera's sync time limitations. This means that if too short a shutter speed is used, part of the image will be shadowed by the camera's curtain shutter. It is common for system cameras to have the shortest sync time around 1/200 - 1/250 sec. With the High Sync (HS) function, it is possible to use shutter speeds down to 1/8000 sec without the exposure changing significantly across the image surface. In order to obtain Hi Sync, you need a studio flash that has a long burning time and a camera trigger dedicated to the camera being used.
HSS (High Speed Sync) - High Speed Sync is another technology that, like HS, allows shutter speeds shorter than the camera's regular sync speeds to be used without the shutter curtain appearing in the image. For this technique, a studio flash with HSS function and dedicated camera trigger is needed.
TTL — The abbreviation stands for "Through-The-Lens" and means that the light measurement takes place through the camera's lens. This means that when you photograph with a studio flash that has the TTL function, it is the camera's light metering that controls the flash's output. For this function, the camera must be equipped with a flash controller that can communicate wirelessly between the camera and the flash.

Elinchrom are a Swiss studio lighting manufacture famed for their consistent innovation and being at the forefront of both portable and studio photographic lighting equipment. Since the start in 1962 Elinchrom have continued to develop and innovate flash lighting, groundbreaking products. Elinchrom studio and portable lighting solutions are available for both professionals and those just getting started with flash photography.

Elinchrom D-Lite RX One Dual Studio Kit

EL-20848.2.EC

Elinchrom D-Lite RX One Dual Studio Kit offers quality and accessories that give you the opportunity to grow as a photographer and lighting expert. This comprehensive studio flash kit is designed for both beginners and experienced photographers, providing the essential tools to either start your creative journey or take your content creation to the next level.

The D-Lite RX One Dual Studio Kit is perfect for portrait photography, baby photography, family portraits, and product photography.

For Beginners to Professionals
Reliable and Versatile
Stable Lighting and User-Friendly
Soft and Even Light Distribution

Elinchrom D-Lite RX ONE Award-Winner

Elinchrom D-Lite RX One - Compact studio flash with professional performance

The foundation of this kit consists of two D-Lite RX One flashes with Rotalux Softboxes 60x80cm. Like all Elinchrom studio flashes, the D-Lite RX One is a reliable, versatile, and stable studio flash. At full power, the flash delivers 100Ws, adjustable over five f-stops with 1/10 step precision. Each flash exposure is delivered with consistent and accurate brightness, ensuring that every image captures your subject’s essence with clarity and detail.

Elinchrom Transmitter Plus - Wirelessly trigger and control your flashes from your camera

With the Elinchrom Transmitter Plus, you can wirelessly control and trigger your flashes from your camera, giving you full creative control. The Transmitter Plus mounts on the camera’s hot shoe and is compatible with most camera brands. By setting your flashes in different Skyport groups, you can individually adjust the power output from the Transmitter Plus.

Premium light modifiers - Rotalux Softbox Recta 60x80 cm

The kit includes two softboxes, Rotalux 60x80 cm. This is a perfect size for creating beautiful portraits of everything from babies to family portraits. You can easily rotate the softbox between portrait and landscape position, ideal for food photography, for example. The Rotalux 60x80 cm has double diffusion panels, which not only provide very even light distribution but also allow you to quickly and easily modify the light’s character from soft to hard by removing the outer diffuser or even both diffusers to create sharp contrasts in the subject.

The kit also includes two stable light stands. The stands have quick locks for adjusting the height, which can be set from 85cm up to 235cm.

The Kit Includes:

2x Elinchrom D-Lite RX One: A reliable, compact flash that delivers light intensity with maximum precision.
Elinchrom Transmitter Plus: Wireless remote trigger compatible with most camera models, allowing both triggering and power adjustment of the flashes.
2x Rotalux Recta Softbox 60 x 80 cm: Maximize flexibility with this softbox size, ideal for both portrait and product photography.
2x Light Stands 88-235cm: Provides stability and security for your lighting setup.

Elinchrom started manufacturing studio flashes in Switzerland in 1962 and has since been at the forefront of developing studio lighting for professional photographers and enthusiasts. Thanks to close contact with photographers worldwide, Elinchrom creates products that provide maximum functionality and performance at highly competitive prices. Elinchrom offers a wide range of studio flashes, light modifiers, and studio accessories built to meet the highest demands and needs of both enthusiast and professional photographers.

Price, VAT excl.6 996

Price8 745

In stock

Buy

Elinchrom D-Lite RX 4/4 Softbox To Go

EL-20839.2.EU

The ultimate studio flash kit for your home or business needs - the Elinchrom D-Lite RX 4/4 To Go Set! This complete set includes all the components you need to achieve professional lighting for your photography projects. The D-Lite RX 4 flash is incredibly powerful and versatile, making it perfect for capturing larger groups and indoor environments. Plus, it's easy to use with its intuitive control system, so you can get started with your shoot in no time.

Powerful output and fast recharging
Intuitive and user-friendly interface
High brightness in a compact design
Built-in Skyport wireless system - Sync and remote control of the flash up to 100 meters.
Short flash duration - Capture fast-moving subjects with precision
Consistent color temperature - Ensures stable and accurate color reproduction
Support for remote control via app and computer

Not only is this kit top-of-the-line in terms of performance, it has also been recognized as one of the best photo products by many photographic magazines like "Digital Camera Magazine." With its winning combination of powerful strength, fast recharge time, and compact design, the Elinchrom D-Lite RX 4/4 To Go Set is the ideal choice for any photography enthusiast or professional."

So whether you're setting up a home studio or looking to upgrade your business's photography equipment, the Elinchrom D-Lite RX 4/4 To Go Set is the ultimate solution. Don't settle for less - get yours today and start capturing stunning photos like never before!

Best in Test

When the magazine "Photographer" tested seven different studio flash kits for the small studio in their special edition "Camera Guide - Summer," the Elinchrom D-Lite RX 4 emerged as the clear winner. The magazine "Photographer" awards the D-Lite RX 4 top marks and writes, among other things, "Full power and fantastic quality," "Smartly designed and beautifully built - Elinchrom D-Lite RX 4/4 Softbox To Go Set is easy to use."

The magazine DigitalFoto presented a test of studio flashes. Elinchrom D-Lite RX excels and receives the finest accolades, including "Best in Test," "Gold Award," and the prestigious "Editor's Choice."

"Swiss precision art truly shines in the D-Lite series," "The controls are intuitive and easy to use, despite the abundance of customization options," "And of all the flash heads in our test, the Elinchrom D-Lite RX4 delivers the best mix of substantial power at a good price, along with a built-in receiver for wireless control. The customization options are straightforward yet versatile."

The magazine DigitalFoto also conducted a test. Even then, the Elinchrom D-Lite RX stood in a class of its own, receiving the accolades "Best in Test," "Gold Award," and "Editor's Choice."

"There is a wealth of really great features packed into these heads, complete with incredibly intuitive controls," "It has class and is extremely sophisticated. The Elinchrom D-Lite RX 4 To Go is simply brilliant," "The stepwise power control is impressively accurate...".

Easier workflow

Control enabled Elinchrom units from your mobile device with the Elinchrom App or your computer with the Elinchrom Studio software along with the Elinchrom Bridge module to simplify your workflow. Keep an overview of your lighting setup from the dashboard and quickly access each units most important settings even when they are out of reach. Any custom setup can be saved and reloaded when needed, saving you time for your next shoot.

Elinchrom Bridge - Trådlös fjärrstyrning

Included in D-Lite RX 4/4 Softbox To Go Set:

2x D-Lite RX 4; incl. 100 W lamp, protective cap, sync cord and mains cable
Portalite Square 66 cm
Portalite Octa 56 cm
1x EL-Skyport transmitter Plus
1x Translucent deflector
1x Tripod set 2 (2x 88 – 235 cm with bag)
1x Tube case for D-Lite 2/4

Specifications for D-Lite ONE and D-Lite RX 4


Specification	D-Lite ONE	Elinchrom D-Lite RX 4
Power	100 Ws	400 Ws
Aperture at 1m, ISO100, Reflector 48°	32.4 f-stop	64.3 f-stop
Output Range	5 f-stops	5 f-stops
Ws Range	7-100Ws	25-400Ws
Elinchrom Value Range on Display	0.1-4.1	2.0-6.0
Adjustable Steps	1/10 f-stop (adjustable to 5/10, 1/1 stop)	1/10 f-stop (adjustable to 5/10, 1/1 stop)
Flash Duration t0.5 Max Output	1/2000	1/800 sec
Recycle Time	0.44 - 1.5 sec	0.35-1.2 sec
Color Temperature at Max Output	5500° Kelvin	5500° Kelvin
Output Stability	±0.5%	±0.5%
Voltage	Multivolt 90-260 V	Multivolt 90-260 V
Modeling Light
Modeling Lamp, Type	E27 100W / 196 V (Brightness equivalent to 150 W)	E27 100W / 196 V (Brightness equivalent to 150 W)
Modeling Lamp, Settings	Proportional, Min, Max, Off	Proportional, Min, Max, Off
VFC
Remote Control
Skyport	8 Frequencies, 4 Groups	8 Frequencies, 4 Groups
Skyport Range	Up to 60 m indoors / 120 m outdoors	Up to 60 m indoors / 120 m outdoors
App / Software	Yes, with Elinchrom Bridge	Yes, with Elinchrom Bridge

Sync Cable	3.5 mm Connection	3.5 mm Connection
Umbrella Mount	7 mm centered, extra mount for larger diameter	7 mm centered, extra mount for larger diameter
Power Consumption	140 W (during charging 370 W)	150 W (during charging 370 W)
Size	19 x 14 x 19 cm	26 x 14 x 19 cm
Weight	0.9 kg	1.5 kg

Price, VAT excl.7 560

Price9 450

In stock

Buy

Elinchrom ELC 500/500 Set

EL-20737.2.EU

Elinchrom ELC 500/500 Set. Elinchrom ELC 500 is the studio flash that unleashes your creative freedom through its easy handling and precise exposure. ELC 500 has TTL automatic with memory when switching to manual control, High Speed Sync (HSS), Smart fan control, Auto-On, LED setting light and direct compatibility with Elinchroms wide range of light formers.

High-Speed Sync Technology (HSS)
Consistent Color Temperature
Intuitive and user-friendly interface
Robust Build Quality and Design

Set with Two Elinchrom ELC 500

Package with two st ELC 500 and reflector 16 cm 90° which is delivered in a compact case with shoulder strap and handle. Complete with tripod package, light shaper and Transmitter Pro.

Elinchrom ELC 500/500 Dual Kit

Successful result from the first exposure with TTL

Put on the flash and take the picture! The ELC 500 has inspiring TTL automatic that provides correct exposure from the first image. When you have placed the main light and fill flash in the desired position, you can switch to manual mode to put your personal touch on the lighting. The exposure value from the TTL mode is saved when switching to manual flash control, which means that you can easily make personal adjustments. For TTL function, the Transmitter Pro X is adapted to the camera brand (Transmitter Pro X can be purchased separately).

The ELCs are ready to go

Balance the light with High Speed Sync (HSS)

Flash photography with ELC is a breeze thanks to the ability to freely change the combination of aperture, ISO number and shutter speed på the camera. Regardless of whether the ambient light consists of a candle or direct sunlight, the photographer can balance the flash so that that the picture gets a frame.

Built for your daily adventure - ELC

Freeze movement with Action mode or HSS

There are several ways to capture a fast video clip razor sharp with the Elinchrom ELC. With HSS, shutter speeds down to 1/8000 sec can be used and with the Action function, the ELC 500 has the shortest shutter speed of 1/9430 sec (t0.1).

Best flash duration t0.1 - 1/9430s

Auto ON

Elinchrom ELC automatically stores last exposure value that you can immediately start shooting after a break. With the Auto On function, the flash starts immediately when the flash is connected to light. Perfect for mounting in e.g. ceiling system when the flash is connected to the studio's main power switch.

Recycling Time 0.06 - 1.1 s.

Robust and Reliable

Both design and construction meet the photographer's highest requirements. ELC is very easy to handle thanks to the strong handle, clear control panel and large OLED display. Electronics and cooling are designed for long, intensive work shifts, which gives high added reliability over time.

Engineered to Last - ELC

Smart Pro Active Cooling

A built-in fan system ensures that the flash maintains the right temperature. Elinchrom's Smart Pro-Active Cooling learns your shooting pace and adapts the cooling to disturbing interruptions are avoided. The flight only starts when needed and the speed is automatically regulated by Smart Pro-Active Cooling.

Deliver maximum reliability - ELC

LED Setup Light - Video Light

Lighting with Elinchrom ELC is easy thanks to the strong LED setting light that shows shadows and reflections on the motive. The color temperature flash light and in

scene lights match each other, which opens up creative photography when shooting with long shutter speeds. The LED light can be adjusted in strength and delivers up to 3000 Lumen with CRI 92.

Daylight LED modeling lamp

Elinchrom Accessories

Elinchrom has the market's widest range of light shapers adapted to provide maximum light yield and even light dispersion. Choose between 130 different models and variants. The bayonet has a quick release, which provides a quick change between different light formers, and the centrally located umbrella allows interesting combinations of different accessories.

Wide range of Elinchrom light shaping tools

Exact Control of the Output

You can control the brightness with 1/10 stop precision across the flash's entire range. ELC 500 has output power 7-522 Ws and thanks to Elinchrom's smart presentation of brightness på the flash's display makes it easy to match flashes with different maximum power. Do you set your flash på Elinchrom number 3.5, the different flashes will give exactly the same brightness.

Always ready to go with ELC flashes

Stable Color Temperature and Brightness

Elinchrom's studio flashes have unique stability på color temperature and brightness. This means that you can always leave a professional end result and minimize post-work with image editing.

Deliver maximum reliability

Skyport Remote control from Camera with Transmitter

Transmitter Pro X is compatible with 4 camera brands and gives ELC full functionality such as TTL, HSS and two-way communication. På The transmitter's display, touch screen, allows you to quickly read each individual flash strength and if you change the effect directly on the studio flash panel is automatically updated by Transmitter Pro. For triggering only, the Skyport Transmitter Plus is an option and if you want to combine the Elinchrom ELC with other flash marks or speedlights, you connect them to the Skyport Receiver Plus. Range for Skyport is up to 60 meters indoors and approx. 200 meters outdoors.

ELC gives you wireless freedom

Remote control via Computer and Smartphone App

With Elinchrom Bridge you can control your flashes from Mac or PC as well as from iOS smartphone. The Elinchrom Studio Software and iOS App give you control over every single flash and you can streamline your workflow when shooting tethered (with direct capture). Elinchrom Studio and iOS App also give you the possibility to name the devices, the Friendly Name function, which provides further simplified handling. When shooting on location, control via smartphone can be a smart alternative.

Ready-Play-Create with ELC

Unique Color Coding of Lightning Groups

Both Elinchrom emblem and background color change color according to which Skyport group you choose to place the flash in. In total there are four groups, A, B, C and D, and you can choose group directly on the flash or via the Elinchrom Studio software. In addition to groups, Skyport has 2x 20 channels for the most secure communication and maximum range in all environments.

Flash groups with color codes

Includes in this article

2x Elinchrom ELC 500 with glass dome
2x Elinchrom Protective Case
2x Elinchrom Reflector 16 cm 90°
2x power cable 5 meters
Elinchrom Väska

Specification Elinchrom ELC 500

Elinchrom started its production of studio flashes in Switzerland back in 1962 and has since been at the forefront of the development of studio lights for professional photographers and enthusiasts. Thanks to close contact with photographers all over the world, Elinchrom can create products that give the photographer maximum function and performance at very advantageous prices. Elinchrom offers a very wide range of studio flashes, light shapers and studio accessories built to meet the highest demands and needs of amateur and professional photographers.

Energy	522Ws
Aperture at 1m, ISO100, Reflector 48°	f/90.4
Aperture at 2m, ISO100, Reflector 48°	f/32.8
Wide output	7 f-steps
Power range Ws	7-522Ws
Power Range Elinchrom numbers on display	0.1-6.3
Adjustable steps Manual location	1/10 aperture
Adjustable steps TTL mode	3/10 aperture with Transmitter Pro
Burning time t0.1 Max output	1/250 sec
Burning time t0.1 Min output	1/9430 sec
Flash Settings	TTL (with Transmitter Pro) and Manual mode
Action mode	Shorter burning time öover the entire effect areaåit
TTL Function	Yes, with Transmitter Pro
HSS Function	Yes, with Transmitter Pro
Upload time	0.06 - 1.1 sec
Upload time to max ECO-mode	1.7 sec
Color temperature at max output	5600 K
Color Temperature Stability	± 200 K
Stability Output	± 0.5%
Volts	AC 100 - 240V
Modeling Light	LED 20W
Brightness Setting Light	Equivalent. 120W halogen, 3000 Lumen
Color Temperature Setting Light	5700 K
CRI Setting Light	92
Flash Tube	Plug-In, EL-24092
Skyport	Built-in, 20 Frequencies / 4 Groups
Skyport Width	About 60m Indoors, About 200m Outdoors
Sync cable - Connection	3.5mm (5V)
Built-in Fan	Yes, starts automatically when needed
Protection class	IP20
Umbrella Mount	Centrally located, fits 7 - 8mm
Energy Use	Max 460W, 3W during Standby
Size	(H)26.3 x (W)16.7 x (L)28 cm
Weight	2.5 Kg

Price, VAT excl.14 200

Price17 750

In stock

Buy

Elinchrom ELC Pro HD 500 To Go Set

EL-20662.2.EU

Elinchrom ELC PRO HD 500 To Go Set. These units are the highest performing compacts from Elinchrom. Equipped with an OLED display for an easy and precise user expe-rience the ELC Pro HD benefits from cutting edge technology. Recycling times are lightning fast at 0.6 seconds to full power while Swiss precision guarantees consistent power time after time, shot after shot. But hardware isn’t all. The software built into this unit gives you the freedom to configure the ELC to your individual style of shooting, for every application. This set includes the latest Elinchrom Skyport transmitter Plus. A strong and robust design which enables photographer to simply trigger and adjust flash power up to 200 m (656 feet) away, optimize reception by its swivel functionality and is powered by AA batteries.

Lightning fast recycling
Navigate with ease
Superfast flash durations
Widest power range
Perfect color and exposure accuracy

Features

Superfast flash durations across the complete power range with visual confirmation on the OLED display
ELC Pro HD 500: up to 1/5000s flash duration
Huge power range - 7 f-stops
User selectable and even shorter recycling times. Now you will never miss a shot!
Even better colour and power stability
Unique OLED power display for information and clarity
Three unique creative modes; Strobo mode, up to 20 Hz
Delayed mode, from 0.001 – 10s, for second curtain sync and other effects
Sequence mode, up to 20 units can be synchronized in sequence to keep up with the fastest motordrive at up to the full power of the flash
All special features utilize the full flash curve with normal colour balance
User replaceable plug-in flashtube
Multi-voltage auto-detection : 90-270 V (excluding modelling lamp)

Set configuration

2x ELC Pro HD 500; incl. 200 W lamp*, protective cap, sync cord and mains cable
2x Glass dome transparent
2x Wide reflector 16 cm 90°
1x EL-Skyport Transmitter Plus
ProTec Location Bag

Specifications Elinchrom ELC Pro HD 500
Energy (Ws/J)	8 - 500 WS
F-Stop (1m, 100 ISO, reflector 48°)	64.8
Power range Ws	7
Flash duration t0.5 in sec.	Min. power: 1/2940 — Max. power: 1/2330
Best flash duration	1/5000 sec at power setting 3.1
Recycling	0.05 to 0.6 sec
Max. frames per s. at min.power	20
Colour temperature in K°	5500
Auto power dumping	Yes
Power stability	± 0.1%
Voltage	Multivoltage 90 – 265 V
Modelling lamp mode	Free, proportional, VFC: -0.5 - -2.0 f-stop
Modelling lamp 230 V	200 W / GX 6.35
Flashtube	S-Type, Omega Plug-in, user replaceable - 24084
EL-Skyport	Built-in transceiver, 20 frequency channels and 4 groups
Sync Voltage	5V
Sync Socket	3.5 mm
Fan cooled	Yes
Optional glass dome frosted	Yes, 24917
Umbrella fitting	Centered 7mm and additional 8mm bracket on the tilt head
Max. power consumption (230 V / 50 Hz) during charge	Slow: 350W // Default: 700W // Fast: 875W
Pure sine battery converter DC/AC: Slow charge	600W with Halogen

Price, VAT excl.18 900

Price23 625

In stock

Buy

Elinchrom ELC Pro HD 1000 To Go Set

EL-20663.2.EU

High power, short flash durations and consistent performance for demanding studio productions. The Elinchrom ELC Pro HD 1000 is built for photographers who need plenty of light while working quickly and precisely. With up to 1000 Ws, fast recycling and short flash durations, it gives you control over everything from carefully lit portraits and product images to fashion and fast-moving subjects.

The wide power range provides flexibility as your lighting setup changes, while consistent output and colour temperature help you maintain uniform results throughout the shoot.

Fast recycling – as little as 1.2 s at full power
Short flash duration – as short as 1/5260 s
Wide power range spanning 8 stops
Consistent output and colour temperature
Designed for long sessions and high-volume shooting

Complete set with two ELC Pro HD 1000 units

The ELC Pro HD 1000 To Go Set includes two 1000 Ws flash units and a Skyport Transmitter Plus for wireless control. The equipment comes in a compact carrying bag with a handle and shoulder strap.

Two flash units give you a flexible starting point for everything from classic two-light setups to more advanced lighting arrangements.

Elinchrom ELC Pro HD 1000 To Go Set

Fast recycling keeps up with your shoot

The ELC Pro HD 1000 recycles in as little as 1.2 seconds at full power and 0.054 seconds at minimum power.

That means less waiting between exposures and more freedom to follow the pace of your subject. For portraits, fashion and movement in particular, fast recycling makes it easier to capture the right moment.

Short flash duration for sharp images of movement

When photographing movement in the studio, flash duration plays an important role in how effectively you can freeze the subject.

The ELC Pro HD 1000 achieves a flash duration as short as 1/5260 second at 80 Ws. This gives you the tools to capture sharp images of dance, fashion, action and other fast-moving subjects.

8-stop power range for greater control

The ELC Pro HD 1000 combines high maximum power with a wide power range. You can move from powerful lighting setups to much lower output levels without changing flash units.

Work at lower power when you want to use a wider aperture and shallow depth of field, or use the higher output with large light modifiers or when lighting a bigger area. Power can be adjusted precisely in 1/10-stop increments.

Consistent light throughout long shoots

Fast recycling and high power need to be matched by stability. The ELC Pro HD 1000 is designed to maintain consistent exposure and colour temperature, even during long sessions and fast-paced shooting.

This helps deliver more uniform results from one frame to the next during product photography, portrait series and commercial productions.

Clear, fast controls

The ELC Pro HD 1000 is designed to make advanced functions straightforward to use. The display presents settings and values clearly, while direct controls let you adjust the flash quickly during a shoot.

You can save four personal presets, making it easy to return to frequently used lighting setups or switch between different shooting situations.

Elinchrom ELC Pro HD display and controls

200 W modelling light

The 200 W modelling light helps you assess the direction, shadows and character of the light before taking a photograph. It can be set proportionally to flash power, adjusted independently or switched off.

The VFC function can also use the modelling light to indicate when the flash has fully recycled.

Please note: Use only modelling lamp EL-23034 with the ELC Pro HD. Similar lamps may have specifications that are unsuitable for the ELC Pro HD.

Elinchrom ELC Pro HD modelling light

Multivoltage for work in different locations

The ELC Pro HD automatically adapts to an input voltage between 90 and 265 V. This makes it useful for photographers working internationally or moving their equipment between studios and locations.

Wireless control with Elinchrom Skyport

The ELC Pro HD has built-in Elinchrom Skyport. With the included Skyport Transmitter Plus, you can trigger the flash units and adjust their power wirelessly from the camera.

The system has a range of approximately 60 metres indoors and up to approximately 200 metres outdoors, giving you room to work in larger studios and on more extensive shoots.

You can also add a Skyport Plus HS for extended control.

Elinchrom Skyport wireless control

Control your flash units from a computer or iOS device

With Elinchrom Bridge, compatible ELC Pro HD units can be controlled from a computer or iOS device. Elinchrom Studio and the Elinchrom App let you monitor and adjust flash functions from one place.

This is especially useful for larger lighting setups where several flash units need adjusting during a shoot.

Elinchrom Bridge for wireless control

Eye-Cell for working with other flash units

The intelligent Eye-Cell optical slave can detect a camera flash sequence and adjust its triggering accordingly. This lets you use the ELC Pro HD alongside speedlights and other flash systems when a shoot calls for different light sources.

Creative functions for advanced lighting setups

The ELC Pro HD offers several functions that give you more control over when and how the flash fires.

Delay – adds an adjustable delay so you can determine when the flash fires during an exposure.
Sequence – lets you combine up to 20 flash units for rapid image sequences. The units can fire in succession to distribute the workload between them.
Strobo – fires multiple flashes during a single exposure, allowing you to capture several phases of movement in one image.

Elinchrom ELC Pro HD creative flash functions

Efficient cooling for long sessions

The built-in microprocessor-controlled fan adjusts its speed to the flash unit’s workload. It provides effective cooling as the pace increases while keeping noise down when full cooling capacity is not needed.

The ELC Pro HD is designed for the long sessions and high shooting volumes that professional studio photography can involve.

An established range of light modifiers

The ELC Pro HD uses Elinchrom’s established accessory mount and can be combined with a wide range of reflectors, umbrellas and Rotalux softboxes.

This lets you adapt the character of the light to your subject and expand your setup as your needs change.

Elinchrom ELC Pro HD and compatible light modifiers

What’s included

2 × Elinchrom ELC Pro HD 1000
2 × protective glass domes
2 × 200 W / GX 6.35 / 230 V halogen modelling lamps
2 × protective caps
2 × 16 cm, 90° reflectors
2 × 5 m power cables
1 × Skyport Transmitter Plus
1 × Elinchrom ELC carrying bag

Please note: Batteries for the Skyport Transmitter Plus are not included. The transmitter uses 2 × AA 1.5 V batteries.

Compare the ELC Pro HD 500 and ELC Pro HD 1000

The ELC Pro HD 500 and ELC Pro HD 1000 share the same system and core workflow. The main differences are available power and power range. The ELC Pro HD 500 has a lower maximum output and faster recycling, while the ELC Pro HD 1000 provides more power and a wider power range.

Specification	Elinchrom ELC Pro HD 500	Elinchrom ELC Pro HD 1000
Energy	522 Ws	1045 Ws
Aperture at 1 m, ISO 100, 48° reflector	f/64.8	f/90.4
Power range	7 stops	8 stops
Power range, Ws	7–522 Ws	7–1044 Ws
Power range, Elinchrom scale	0.1–6.3	0.1–7.3
Adjustment	1/10 stop	1/10 stop
Flash duration t0.5, maximum power	1/2330 s	1/1430 s
Flash duration t0.5, minimum power	1/2940 s	1/2780 s
Shortest flash duration	1/5000 s at Elinchrom scale 3.1	1/5260 s at Elinchrom scale 3.6
Auto Power Dumping	Yes	Yes
Max. flashes per second	20	20
Recycle time, Slow	2.0 s	4.0 s
Recycle time, Default	0.75 s	1.5 s
Recycle time, Fast	0.6 s	1.2 s
Colour temperature at maximum power	5600 K	5600 K
Colour temperature stability	± 200 K	± 200 K
Power stability	± 0.1%	± 0.1%
Multivoltage	90–265 V	90–265 V
Modelling light	200 W halogen / GX 6.35	200 W halogen / GX 6.35
Modelling light colour temperature	3400 K	3400 K
Flash tube	Plug-in, EL-24080	Plug-in, EL-24080
Skyport	Built-in, 20 frequencies / 4 groups	Built-in, 20 frequencies / 4 groups
Skyport range	Approx. 60 m indoors / 200 m outdoors	Approx. 60 m indoors / 200 m outdoors
Sync socket	3.5 mm (5 V)	3.5 mm (5 V)
Built-in fan	Yes, activates automatically when needed	Yes, activates automatically when needed
Protection rating	IP20	IP20
Umbrella mount	Central, for 7 mm shaft	Central, for 7 mm shaft
Power consumption, Slow	350 W	350 W
Power consumption, Default	700 W	700 W
Power consumption, Fast	875 W	875 W
Dimensions	31.5 × 14 × 21 cm	31.5 × 14 × 21 cm
Weight	2.5 kg	2.5 kg

Price, VAT excl.21 900

Price27 375

In stock

Buy

Elinchrom ONE | Off Camera Flash Kit

EL-20932

Always be ready when inspiration strikes with the supremely compact and lightweight Elinchrom ONE. With only 1.5 kg, the ONE merges 131Ws of capacity with features including an integrated Li-ion battery, USB-C Active Charging, TTL, HSS, and a streamlined touch interface into a low profile housing. A portable, rugged and dependable off-camera flash equipped for your next adventure. Wherever that will be.

Super compact - Only 1.5 kg
725 flashes at max power
TTL/HSS
Active Charging via USB-C
Touchscreen
LED for video - Adjustable color temperature
Bluetooth and WLAN
Elinchrom App for iOS and Android
Elinchrom Studio Software for computer

Elinchrom ONE - In your hand

Digital Camera World review of Elinchrom ONE - Five Stars

Five Stars to Elinchrom ONE

Digital Camera World is the world's fastest-growing photography website. In a review, they give the Elinchrom ONE the maximum rating "Five Stars".
"The Elinchrom One is a powerful, portable, versatile monolight that delivers fantastic performance in a tiny footprint."
"And you can keep on shooting when the battery is dry, by plugging in a USB source – either via mains power or a USB power bank, which is an absolute godsend when working on location (and isn't possible on the Profoto or Godox)."
"It has a beautiful and intuitive touch menu system..."
"The Elinchrom One is a fantastic flash unit for freezing motion, overpowering the sun with high speed sync, shooting products and portraits in studio or events and lifestyle on location. "
Read the full review in the links tab.

Video Elinchrom ONE

Keep a low profile

Add the versatility of an off-camera flash with light shaping capabilities to any kit while maintaining a minimal footprint with the Elinchrom ONE. Similar in size and weight (1.5kg) to a 70-200mm lens, the ONE is ready to travel with you anywhere and everywhere.

Elinchrom ONE - Small size

Brave the elements

The Elinchrom ONE utilizes a sealed Li-ion battery for maximum portability and enhanced protection from the elements while on location. Plus, you are not tied to proprietary spare batteries or chargers with the ability to charge from any USB-C source.

Elinchrom ONE - Sealed Li-Ion battery

Never lose momentum

Capable of producing 725 full-power flashes on a single charge, the Elinchrom ONE is ready for longer shoots. Additionally, with Active Charging, the ONE can be connected to a power source and continue shooting while charging regardless of the battery’s power level, keeping your workflow uninterrupted.

Shape your story

Shaping light is at the heart of every great photo you create. Designed around an unconcealed flash tube for optimal light spread, the Elinchrom ONE ensures you experience the beautiful light quality Elinchrom is known for.

Elinchrom ONE - Shape Your Story

Your choice of light modifiers

Engineered to use the newly developed Elinchrom OCF modifier mount, the Elinchrom ONE is also natively compatible with most Profoto® OCF light shapers, greatly expanding your selection of available light shaping tools. The included Elinchrom OCF to Bayonet Adapter enables quick mounting to speedrings and reflectors using the traditional Elinchrom bayonet.

Elinchrom ONE - Adapter System

Do more with less

Engineered for peak efficiency, the Elinchrom ONE utilizes its 131 Ws of capacity to generate a light output usually seen in 200+ Ws units. At 1 meter and 100 ISO, the ONE can achieve F-11.9, with the Diffusion Dome attached, and when combined with the HP Reflector, the achievable F-Stop climbs to F-45.2.

Elinchrom ONE - Engineered for peak efficiency

Navigate swiftly

With a touchscreen interface and a newly designed menu structure, experience a streamlined access to the ONE’s settings to ensure you never miss a chance to capture the moment.

Elinchrom ONE - Navigate swiftly

Supreme portability
Weighing only 1.5kg (3.3 lbs) and similar in size than a 70-200mm lens, the ONE is ready to travel with you anywhere and everywhere.
Integrated Li-Ion battery
Enables up to 725 full-power flashes on a single charge and enhanced protection from the elements while on location.
USB-C charge port
Charge the Elinchrom ONE from any USB-C source without proprietary spare batteries or chargers.
Active Charging
Connect the Elinchrom ONE to a power source and continue shooting while charging regardless of the battery’s power level.
Elinchrom OCF modifier mount
Natively compatible with Profoto OCF and the traditional Elinchrom bayonet mount via an included adapter.
Touch screen interface
Clever and streamlined interface designed to provide the most efficient user experience and quick set up times.
Powerful bicolor LED modeling lamp
Adjustable color temperature of 2700 to 6500 with an output of 3000 Lumens and a CRI 95.
Fast recycle times and precise color accuracy
The ONE recycles in 0.9 seconds at full power and maintains a +/- 150K color temperature over the entire power range.
Sync up to 1/8000s with HSS
Freeze motion, overpower ambient light and darken backgrounds.
TTL with Manual Lock
Enables a quick switch from TTL to manual without losing exposure settings.
Smart Pro-Active Cooling
The Elinchrom ONE learns your shooting style and adapts its cooling cycle around it.
Removable tilt-head
The two-way metal tilt-head with 7-8 mm umbrella mount detaches, making the Elinchrom ONE ergonomic for hand-holding.

Elinchrom ONE - Off Camera Flash kit

In the box

Elinchrom ONE
Elinchrom OCF Adapter
Elinchrom OCF Diffusion Dome
Elinchrom 65W USB-C Wall Charger
Elinchrom USB-C Cable 1.8 m
Elinchrom ONE Case

Specifications Elinchrom OFF Camera Flash

Specifications	Elinchrom ONE	Elinchrom THREE
Energy	131 Ws	261 Ws
F-Stop (1m, 100 ISO, HP Reflector 26 cm, max power)	f/45.2	f/64.3
F-Stop (1m, 100 ISO, OCF Diffusion Dome, max power)	f/11.9	f/22
Power range (F-Stop)	5 f-stop	6 f-stop
Power range (Ws/J)	7-131 Ws	7-261 Ws
Power range display	0.1-4.3 (Elinchrom scale) / 5.8-10 (10 scale)	0.1-5.3 (Elinchrom scale) / 4.8-10 (10 scale)
Power increments in Manual / TTL mode	0.1 F-Stop / 0.3 F-Stop	0.1 F-Stop / 0.3 F-Stop
Flash duration t0.1 min/max power (Standard mode)	1/1530 - 1/155 sec	1/1550 - 1/255 sec
Flash duration t0.1 min/max power (Action mode)	1/7000 - 1/625 sec	1/8500 - 1/440 sec
Recycling time min/max power	0.06 / 0.9 sec	0.08 / 1.2 sec
Flash mode	Manual / TTL / HSS (with Transmitter Pro)	Manual / TTL / HSS (with Transmitter Pro)
Action mode	Faster flash duration over the power range	Faster flash duration over the power range
TTL Function	Yes, with Transmitter Pro	Yes, with Transmitter Pro
HSS Function	Yes, with Transmitter Pro	Yes, with Transmitter Pro
Flash colour temperature at max power	5900 K (Action) / 5600 K (HSS)	5900 K (Action) / 5600 K (HSS)
Flash colour stability over the power range (all modes)	± 150 K	± 150 K
Power stability	± 0.5%	± 0.5%
Beam Angle (degrees)	160°	160°
Auto power dumping	Adjusts power settings automatically in real time	Adjusts power settings automatically in real time
Fan cooled	Smart proactive cooling	Smart proactive cooling
Input	USB-C	USB-C
IP Class	IP20	IP20
Flash Tube	EL-24091	EL-24091
Battery
Battery	Li-Ion - Built-in - 41.04Wh	Li-Ion - Built-in - 41.04Wh
Battery capacity min/max power (LED lamp OFF)	9700 / 725	11250 / 525
Battery capacity min/max power (LED lamp ON 100%)	9000 / 420
Battery charge status	On the display if ON and side logo if OFF	On the display if ON and side logo if OFF
Charging time (with 65W USB-C Wall Charger)	60 m (80%) – 80 m (100%) / Fast charge (unit ON) 80 m (80%) – 100 m (100%) / Slow charge (unit OFF)	60 m (80%) – 100 m (100%) / Fast charge (unit ON) 80 m (80%) – 135 m (100%) / Slow charge (unit OFF)
Charging time (with 18W 20000 mAh Power Bank) USB-C sources need to be able to deliver at least 25W for fast charge to be activated	80 m (80%) – 135 m (100%) / Fast charge (unit ON) 105 m (80%) – 180 m (100%) / Slow charge (unit OFF)	80 m (80%) – 135 m (100%) / Fast charge (unit ON) 105 m (80%) – 180 m (100%) / Slow charge (unit OFF)
LED
LED modeling lamp modes	ON/OFF, free, proportional, VFC	ON/OFF, free, proportional, VFC
LED modeling lamp power	20W / equivalent to 120W / 3000 lm / CRI 95	20W / equivalent to 120W / 3000 lm / CRI 95
LED modeling lamp color temperature	Presets from 2700 K to 6500 K	Presets from 2700 K to 6500 K
LED run time (LED only, min/max power)	10 hours / 90 minutes	10 hours / 90 minutes
Radio
Skyport (built-in)	20 frequency channels, 4 Groups	20 frequency channels, 4 Groups
Skyport distance range (Transmitter Pro, manual mode)	Indoor: up to 60 m / Outdoor: up to 200 m	Indoor: up to 60 m / Outdoor: up to 200 m
Bluetooth® (built-in)	Version 4.2 / Compatible Studio Software Win, Mac, iOS, Android	Version 4.2 / Compatible Studio Software Win, Mac, iOS, Android
Skyport Frequency	2404~2478MHz	2404~2478MHz
Bluetooth® Frequency	2402~2480MHz	2402~2480MHz
WLAN	2412~2472MHz	2412~2472MHz
Size
Umbrella fitting (on tilt head)	7-8 mm	7-8 mm
Dimensions with Diffusion Dome and tilt head	25.3 x 16.5 x 10.5 cm	23.3 x 16.5 x 10.5 cm
Dimensions without Diffusion Dome and tilt head	24.5 x 10 x 10 cm	22.5 x 10 x 10 cm
Weight (with/without tilt head)	1.5 kg / 1.3 kg	1.65 kg / 1.45 kg

Product FAQ

Yes. Elinchrom ONE & THREE has built-in Bluetooth and you can control ONE & THREE with Elinchrom Studio Software and/or the iOS App/Android App. In addition, ONE & THREE have a built-in Skyport Bridge so they communicate automatically with older Elinchrom flashes that can also be controlled via smartphone and computer.

Active Charge is a function that allows you to charge the flash's battery while you are shooting. The connection on ONE & THREE is USB-C, which makes it possible to use a USB-C power adapter or power bank to charge the built-in battery while the device is being used.

To lock the touchscreen on the ONE & THREE, press the ON button while turning on the device for 9 seconds. The lock symbol indicates that the touchscreen is locked, to unlock, turn the device OFF and ON again.

It is perfect to use the built-in LED light on ONE & THREE as lighting for film and video production. The light quality is very high, which means that colors and skin tones are reproduced correctly. In addition, the LED light can be adjusted in brightness and the color temperature can be adjusted in fixed steps from 2700K to 6500K. The brightness of the LED light is approx. 3000 Lumen and corresponds to a halogen lamp of approx. 120W

ONE and THREE have an OCF mount for light shapers as standard, which gives access to a large range of light shapers from different manufacturers. In addition, an adapter for Elinchrom bayonet is always included when you buy ONE & THREE, which means that the entire Elinchrom range of light shapers fits.

Yes, at our service the battery can be replaced but this type of question is mostly asked by prospective owners of ONE & THREE, very rarely by users as battery capacity and battery life is first class on Elinchrom products. The built-in battery has a very high capacity, which combined with advanced control of battery charging gives a very long battery life. The combination of built-in battery with high capacity and Active Charging via USB-C connection gives ONE & THREE unique performance. Tip! Always charge the battery after shooting. A completely discharged Li-Ion battery can be damaged if it is left for a long time without maintenance charging.

Price, VAT excl.7 996

Price9 995

In stock

Buy

Elinchrom ONE | Off Camera Flash Dual Kit

EL-20931

Super compact Only 1,5 kg
725 Flashes Full Power
TTL and HSS
Active Charging
Touchscreen
LED for video - Adjustable Color Temperature
Bluetooth and WLAN

Elinchrom ONE - In your hand

Digital Camera World review of Elinchrom ONE - Five Stars

Five Stars to Elinchrom ONE